Xerox WorkCentre 7132 - Page 1451

January 2007
6-128
WorkCentre 7132
Controller & Fax NVM List
Reversion 4.0
General procedures information
790-292 Basic Screen Preset R/E 3 1~7 7: R/E Preset 7 Read/
Write
1~7: R/E Reset 1~7
790-300 Enable/Disable Special Docu-
ment Selection Display
0~1 0: Do not dis-
play
Read/
Write
0: Do not display 1: Display
790-301 Default Top Edge Erase Margin 0~50 2 (mm) Read/
Write
1mm unit from 0 (mm) to 50 (mm)
790-302 Default Bottom Edge Erase
Margin
0~50 2 (mm) Read/
Write
1mm unit from 0 (mm) to 50 (mm)
790-303 Default Left Edge Erase Margin 0~50 2 (mm) Read/
Write
1mm unit from 0 (mm) to 50 (mm)
790-304 Default Right Edge Erase Mar-
gin
0~50 2 (mm) Read/
Write
1mm unit from 0 (mm) to 50 (mm)
790-305 Direction Adjust in Scan 0~1 0: ON Read/
Write
0: OFF, 1: ON
790-306 Bleed Prevention Default 0~1 0: OFF Read/
Write
0: OFF, 1: ON
790-307 Default Compression Ratio 0~4 2: Normal Read/
Write
0: High Compression Rate Priority, 1: Moderate Compression Rate Priority, 2: Normal, 3: Moderate
Image Quality Priority, 4: High Image Quality Priority
790-308 Default Transfer Protocol 0~2 0: FTP Read/
Write
0: FTP, 1: SMB, 2: SMB (UNC)
790-309 Default File Format 0~4 0: TIFF/JFIF
Auto Select
Read/
Write
0: TIFF/JFIF Auto Select, 1: TIFF (Single Page File), 2: TIFF (Multiple Pages), 3: PDF, 4: XDW (Not
applicable for XC/XE)
790-310 IFax Send Confirmation Default 0~1 0: OFF Read/
Write
0: OFF, 1: ON
790-311 Default Sharpness Adjustment 0~4 2: Normal Read/
Write
0: Stronger 2, 1: Stronger 1, 2: Normal, 3: Softer 1, 4: Softer 2
790-312 Enable/Disable Edge Erase 0~1 0: Enable Read/
Write
0: Enable, 1: Disable
790-317 Color Space Display Settings 0~1 1: Do not dis-
play
Read/
Write
0: Display, 1: Do not display
790-320 BW Copy Document Type
Default (when Document Type
is “Auto”)
1~10 1: Text (Nor-
mal Text)
Read/
Write
1: Text (Normal Text), 2: Text (Pencil Text (Black)), 4: Text/Photo (Print), 5: Text/Photo (Photograph
Paper), 6: Text/Photo (Color Copy), 7: Photo (Print), 8: Photo (Photograph Paper), 9: Photo (Color
Copy), 10: Map
790-321 Default Document Type for
Color/Auto (ACS) (when Docu
-
ment Type is “Auto”)
1~10 4: Text/Photo
(Print)
Read/
Write
1: Text (Normal Text), 4: Text/Photo (Print), 5: Text/Photo (Photograph Paper), 6: Text/Photo (Color
Copy), 7: Photo (Print), 8: Photo (Photograph Paper), 9: Photo (Color Copy), 10: Map
790-322 Default Side 2 Edge Erase 0~1 0: Same as
Side 1
Read/
Write
0: Same as Side 1, 1: Side 1 as Target
Table 8 UI
Chain-Link NVM Name
Setup
Range Initial Value
Read/
Write Description