Xerox WorkCentre 7132 - Page 1467

January 2007
6-144
WorkCentre 7132
Controller & Fax NVM List
Reversion 4.0
General procedures information
810-121 Color Balance (K: Low Den-
sity)
0~6 3: Normal Read/Write 0: Lighter 3, 1: Lighter 2, 2: Lighter 1, 3: Normal, 4: Darker 1, 5: Darker 2, 6:
Darker 3
810-122 Color Balance (K: Medium
Density)
0~6 1: Lighter 2 Read/Write 0: Lighter 3, 1: Lighter 2, 2: Lighter 1, 3: Normal, 4: Darker 1, 5: Darker 2, 6:
Darker 3
810-123 Color Balance (K: High Den-
sity)
0~6 5: Darker 2 Read/Write 0: Lighter 3, 1: Lighter 2, 2: Lighter 1, 3: Normal, 4: Darker 1, 5: Darker 2, 6:
Darker 3
810-124 Color Shift 0~4 2: 0 degree Read/Write 0: -2 degree, 1: -10 degree, 2: 0 degree, 3: +10 degree, 4: +20 degree
810-125 Color Saturation 0~4 2: Normal Read/Write 0: Higher, 1: High, 2: Normal, 3: Low, 4: Lower
810-126 Sharpness 0~4 2: Normal Read/Write 0: Sharper, 1: Sharp, 2: Normal, 3: Soft, 4: Softer
810-127 Contrast 0~4 1: Sharp Read/Write 0: Sharper, 1: Sharp, 2: Normal, 3: Soft, 4: Softer
810-129 Max. No. of Copy Sheets
accumulated
1~999 999 Read/Write 1-999: [1~999 pages]
810-132 Enable/Disable ATS Imple-
mentation
0~2 1: APS Only Read/Write 1: APS Only, 0: Always (Even for manual tray selection)
810-136 Availability of Duplex APS
Chapters
0~1 0: Disable Read/Write 0: Disable, 1: Enable
810-156 Text Effect Default 1~3 1: Embossed Read/Write 1: Embossed, 2: Outline, 3: Text
810-157 Text Size 1~125 48: 48 points Read/Write 48: 48 points, 64: 64 points, 80: 80 points
810-158 Background Pattern 1~8 8: Fan Read/Write 1: Wave, 2: Circle, 3: Stripe, 4: Chain, 5: Beam, 6: Rhombic, 7: Sunflower, 8: Fan
810-159 Background Color (Text Color) 9~12 9: Black Read/Write 9: Black, 11: Magenta, 12: Cyan
810-160 Density 7~9 8: Normal Read/Write 9: Light, 8: Normal, 7: Dark
810-161 Contrast 0~13 7 Read/Write -
810-162 Printing Pattern (Date) 1~4 1 Read/Write 1: 20yy/mm/dd (hh: mm), 2: mm/dd/20yy (hh: mm), 3: dd/mm/20yy (hh: mm), 4:
20yy year mm month dd date (hh hour mm minute) (hh hour mm min)
810-163 Copy Forced Analog Water-
Mark Output Settings
0~1 0: Do not print Read/Write 0: Do not print, 1: Print
810-164 Client Print Forced Analog
Watermark Output Settings
0~1 0: Do not print Read/Write 0: Do not print, 1: Print
810-165 Device Activation Print Forced
Analog Watermark Output
Settings
0~1 0: Do not print Read/Write 0: Do not print, 1: Print
810-166 Media Print Forced Analog
Watermark Output Settings
0~1 0: Do not print Read/Write 0: Do not print, 1: Print
810-212 Side 2 Print Page Position
Fine Adjustment (Horizontal)
0~400 200 Read/Write 0~200: Settings x 0.5 (mm)
810-213 Side 2 Print Page Position
Fine Adjustment (Vertical)
0~400 200 Read/Write 0~200: Settings x 0.5 (mm)
810-214 Stamp User Registered Text 1 NULL Read/Write 64+1 Bytes (32 double byte characters, 64 single byte characters)
810-215 Stamp User Registered Text 2 NULL Read/Write 64+1 Bytes (32 double byte characters, 64 single byte characters)
810-216 Stamp User Registered Text 3 NULL Read/Write 64+1 Bytes (32 double byte characters, 64 single byte characters)
810-217 Stamp User Registered Text 4 NULL Read/Write 64+1 Bytes (32 double byte characters, 64 single byte characters)
810-218 Stamp User Registered Text 5 NULL Read/Write 64+1 Bytes (32 double byte characters, 64 single byte characters)
Table 9 Copy Service
Chain-Link NVM Name
Setup
Range Initial Value Read/Write Description