January 2007
6-216
WorkCentre 7132
GP 13
Reversion 4.0
General procedures information
Figure 4 (Scan Properties (Sharing))
5. Select the Add button and then select the Advanced button.
6. Select Find Now. When the user list is displayed, highlight the user that you just created
(Figure 5).
• If your User is not in the list, Select the Locations button, find the name of your
PWS, (normally the top item) highlight it and select OK. Return to step 6. (Remem
-
ber your PWS name for later.)
Figure 5 (Select Users or Groups)
7. Select OK twice
8. You should be at the Permissions window for your folder. Check the box(es) to allow
Change and Read permissions for your user account (Figure 6).
To Next Page
Loading...
