Xerox WorkCentre 7132 Service Documentation

January 2007
4-11
WorkCentre 7132
REP 1.1.2
Repairs/Adjustments
Reversion 4.0
Figure 3 Disconnecting cable clamps or removing cable ties
8. Remove the screws (3) and remove the lower support bracket. (Figure 4)
Figure 4 Removing the lower bracket
9. Remove the screws (5). (Figure 5)
1
Disconnect the cable
from the clamps
2
Remove cable from clamps and
remove ties from Assembly
1
Remove the screws (3)
2
Remove the lower bracket

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English