Renesas RX Series User Manual

R01UH0823EJ0100 Rev.1.00 Page 451 of 1823
Jul 31, 2019
RX23W Group 22. Multi-Function Pin Controller (MPC)
22. Multi-Function Pin Controller (MPC)
22.1 Overview
The multi-function pin controller (MPC) is used to allocate input and output signals for peripheral modules and input
interrupt signals to pins from among multiple ports.
Table 22.1 shows the allocation of pin functions to multiple pins. The symbols  and × in the table indicate whether the
pins are or are not present on the given package. Allocating the same function to more than one pin is prohibited.
Table 22.1 Allocation of Pin Functions to Multiple Pins (1/6)
Module/Function Channel Pin Functions Allocation Port
Package
84-pin 56-pin
Interrupt NMI (input) P35 
Interrupt IRQ0 (input) P30 
IRQ1 (input) P31 
IRQ4 (input) PB1 
P14 
IRQ5 (input) P15 
IRQ6 (input) P16 
IRQ7 (input) PE2 
P17 
Clock generation circuit CLKOUT (output) PE3 
PE4 
Multi-function timer unit 2 MTU0 MTIOC0A (input/output) PB3  ×
MTIOC0B (input/output) P15

MTIOC0C (input/output) PB1 
MTU1 MTIOC1A (input/output) PE4 
MTIOC1B (input/output) P21  ×
PB5
 ×
MTU2 MTIOC2A (input/output) P26

PB5  ×
MTIOC2B (input/output) P27

MTU3 MTIOC3A (input/output) P14 
P17 
PC7 
MTIOC3B (input/output) P17 
P22  ×
PB7

PC5 
MTIOC3C (input/output) P16 
PC0 
PC6 
PJ3  ×
MTIOC3D (input/output) P16

PC4 

Renesas RX Series Specifications

General

Core	RXv1, RXv2, RXv3
Flash Memory	Up to 8 MB
RAM	Up to 1 MB
Operating Voltage	1.62V to 5.5V
Operating Temperature	-40°C to +85°C or +105°C
Package	BGA, LQFP
ADC Resolution	12-bit
DAC Resolution	12-bit
Communication Interfaces	SCI, SPI, I2C, USB, Ethernet, CAN
Architecture	32-bit
Security Features	Memory Protection Unit (MPU)