January 2007
6-85
WorkCentre 7132
IIT NVM List
General procedures information
Reversion 4.0
715-615 Background Color Suppression Threshold Value
(NAE3)
8 0~65535 NAE Color Line threshold value Specify the no. of lines. NAETHC
715-616 Background Color Suppression Threshold Value
(NAE4)
4 0~65535 NAE Color Line threshold value Specify the no. of lines. NAETHY
715-617 AE Control of FS Length 0 0~1 0: Always use the document size detection result 1: Use the input document size as the detection
size For AES parameter calculation.
715-618 Minimum FS Length for AE 500 0~65535 Fast Scan Detection Min range (0.1mm increments) For AES parameter calculation.
715-619 AE Parameter Slow Scan Enlargement Correction
Upper Limit 1
4000 0~4000 Slow Scan Detection Max range (0.1mm increments) For RAE.
715-620 AE Parameter Slow Scan Enlargement Correction
Upper Limit 2
4000 0~4000 Slow Scan Detection Max range (0.1mm increments) For MAE.
715-621 AE Parameter Slow Scan Enlargement Correction
Upper Limit 3
4000 0~4000 Slow Scan Detection Max range (0.1mm increments) For HAE.
715-622 AE Parameter Slow Scan Enlargement Correction
Upper Limit 4
4000 0~4000 Slow Scan Detection Max range (0.1mm increments) For NAE.
715-629 TX_BW_Fax Offset Level of AE (Normal, Pencil) 0 0~8191 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy
715-630 TP_BW_Copy_Fax Suppression Level of AE
(Print, Photograph, Copy)
0 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy (* Used as the PreIPS EAER_DAT suppression level
as well)
715-631 TP_BW_Copy_Fax Offset Level of AE (Print,
Photograph, Copy)
273 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy
715-632 TX_BW_Copy_Fax Suppression Level of AE
(Normal, Pencil Text)
0 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF. 8bit~11bit, CVT or DADF 2 Sided Copy (* Used as the PreIPS EAER_DAT suppression level
as well)
715-633 TX_BW_Copy_Fax Offset Level of AE (Normal,
Pencil Text)
273 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy
715-634 TPL_BW_Copy_Fax Suppression Level of AE
(Light Document)
0 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy (* Used as the PreIPS EAER_DAT suppression level
as well)
715-635 TPL_BW_Copy_Fax Offset Level of AE (Light
Document)
273 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy
715-636 TRP_BW_Copy_Fax Suppression Level of AE
(Tracing Paper)
0 0~4095 0: Strength Level 0 (standard), 1: Strength Level 1, 2: Strength Level 2, 3: Strength Level 3, 4:
Strength Level 4, 5~15 and above: Strength Level 0 (standard) 0bit~3bit, Platen 4bit~7bit, CVT or
DADF 8bit~11bit, CVT or DADF 2 Sided Copy (* Used as the PreIPS EAER_DAT suppression level
as well)
Table 3 IISS
Chain-Link Content Default Range Meaning