Xerox WorkCentre 7132

January 2007
6-156
WorkCentre 7132
Controller & Fax NVM List
Reversion 4.0
General procedures information
825-185 Ch0 ECM CTC Number 0~7 5 Read/Write 0: 000 ~ 7: 111
825-186 ECM CTC Number for Ch1 0~7 5 Read/Write 0: 000 ~ 7: 111
825-187 ECM CTC Number for Ch2 0~7 5 Read/Write 0: 000 ~ 7: 111
825-188 ECM CTC Number for Ch3 0~7 5 Read/Write 0: 000 ~ 7: 111
825-189 ECM CTC Number for Ch4 0~7 5 Read/Write 0: 000 ~ 7: 111
825-190 ECM CTC Number for Ch5 0~7 5 Read/Write 0: 000 ~ 7: 111
825-191 Ch0 ECM CTC Speed Shift Down (CTC:
Instructs to continue resending for the
same block and to change the transmission
speed where necessary, by the signal
capable of transmission for every 3 times of
resending)
0~1 1: Shift Down Read/Write 0: Not, 1: Shift down
825-192 Ch1 ECM CTC Speed Shift Down (CTC:
Instructs to continue resending for the
same block and to change the transmission
speed where necessary, by the signal
capable of transmission for every 3 times of
resending)
0~1 1: Shift Down Read/Write 0: Not, 1: Shift down
825-193 Ch2 ECM CTC Speed Shift Down (CTC:
Instructs to continue resending for the
same block and to change the transmission
speed where necessary, by the signal
capable of transmission for every 3 times of
resending)
0~1 1: Shift Down Read/Write 0: Not, 1: Shift down
825-194 Ch3 ECM CTC Speed Shift Down (CTC:
Instructs to continue resending for the
same block and to change the transmission
speed where necessary, by the signal
capable of transmission for every 3 times of
resending)
0~1 1: Shift Down Read/Write 0: Not, 1: Shift down
825-195 Ch4 ECM CTC Speed Shift Down (CTC:
Instructs to continue resending for the
same block and to change the transmission
speed where necessary, by the signal
capable of transmission for every 3 times of
resending)
0~1 1: Shift Down Read/Write 0: Not, 1: Shift down
825-196 Ch5 ECM CTC Speed Shift Down (CTC:
Instructs to continue resending for the
same block and to change the transmission
speed where necessary, by the signal
capable of transmission for every 3 times of
resending)
0~1 1: Shift Down Read/Write 0: Not, 1: Shift down
825-197 G3 DIS ignore for Channel 0 (No. of DIS
ignored)
0~1 0: Ignore DIS Read/Write 0: Ignore DIS 1: Ignore DIS once
Table 11 NVM 825 FAX Service
Chain-Link NVM Name
Setup
Range Initial Value Read/Write Description