Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.8 SEM Measurement
3.8.1 Results for n = 1
For WLAN Mode, these results apply to all standards except 802.11ac/ax
(80+80MHz).
Returns 82 comma-separated scalar results, in the following order:
k is an index for each offset: k = 0 for offset A; k = 1 for offset B; k = 2 for offset C, etc.
The number of offsets is 6 (A-F).
# Item Unit, if any
1 Reserved for future use, returns -999.0
2 Power
(*1)
at the center frequency (reference) area When "Measurement Type" on page 1174
is PSD Ref: dBm/Hz
Others: dBm
3~4 Reserved for future use, returns -999.0
5 Peak frequency in the center frequency (reference) area Hz
6~10 Reserved for future use, returns -999.0
11
10k + 11,
k = 0
Relative integrated power on the negative offset A
Returns -999.0 when "Measurement Type" on page 1174 is
Spectrum Peak Ref
When "Measurement Type" on page 1174
is PSD Ref: dB
When Total Power Ref: dBc
12
10k + 12,
k = 0
Absolute integrated power on the negative offset A
Returns -999.0 when "Measurement Type" on page 1174 is
Spectrum Peak Ref
When "Measurement Type" on page 1174
is PSD Ref: dBm/Hz
When Total Power Ref: dBm
13
10k + 13,
k = 0
Relative peak power on the negative offset A When "Measurement Type" on page 1174
is Total Power Ref: dBc
Others: dB
14
10k + 14,
k = 0
Absolute peak power on the negative offset A When "Measurement Type" on page 1174
is PSD Ref: dBm/Hz
Others: dBm
15
10k + 15,
k = 0
Peak power offset frequency from the center or carrier edge
frequency in the negative offset A
Depends on the setting of "Offset Freq Define" on page 1116
Hz
16
10k + 16,
k = 0
Relative integrated power on the positive offset A
Returns -999.0 when "Measurement Type" on page 1174 is
Spectrum Peak Ref
When "Measurement Type" on page 1174
is PSD Ref: dB
Others: dBc
17
10k + 17,
k = 0
Absolute integrated power on the positive offset A
Returns -999.0 when "Measurement Type" on page 1174 is
Spectrum Peak Ref
When "Measurement Type" on page 1174
is PSD Ref: dBm/Hz
Others: dBm
18
10k + 18,
k = 0
Relative peak power on the positive offset A When "Measurement Type" on page 1174
is Total Power Ref: dBc
Others: dB
1012 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)