Keysight x-series Instruction Manual

7 Save/Recall/Print
7.3 Save
7.3.22 Operator
See PD - Mode - EMI Receiver.docx
7.3.23 Product Description
See PD - Mode - EMI Receiver.docx
7.3.24 Logo
See PD - Mode - EMI Receiver.docx
7.3.25 Browse
Lets you select an image that will be shown in the report if desired. Supported
formats for images are: .jpg, .png and .bmp.
Remote Command
:MMEMory:TRACe:LOGO:FILE "File Name"
Example
:MMEMory:TRACe:LOGO:FILE "C:\Temp\image.jpg"
Dependencies Grayed-out if the logo’s state is off
State Saved Saved in instrument state
7.3.26 Setting On/Off
See PD - Mode - EMI Receiver.docx
7.3.27 Trace Data On/Off
See PD - Mode - EMI Receiver.docx
7.3.28 Amplitude Correction Display
See PD - Mode - EMI Receiver.docx
7.3.29 Limits Display State
See PD - Mode - EMI Receiver.docx
2288 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)