Keysight x-series Instruction Manual

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
Oversweep (Meas Uncal) is reported to the Integrity Summary of the Status Questionable register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Questionable Integrity Output Event Query
Returns the decimal value of the sum of the bits in the "Questionable Integrity
Output Condition" on page 2505 register.
NOTE
The register requires that the associated PTRansition or NTRansition filters
be set before a condition register bit can set a bit in the event register. The data
in this register is latched until it is queried. Once queried, the register is cleared.
Remote Command
:STATus:QUEStionable:INTegrity:OUTPut[:EVENt]?
Example
:STAT:QUES:INT:OUTP?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
Questionable Integrity Output Negative Transition
Determines which bits in the "Questionable Integrity Output Condition" on page
2505 register will set the corresponding bit in the "Questionable Integrity Output
Event Query" on page 2506 register when the condition register bit has a negative
transition (1 to 0).
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:QUEStionable:INTegrity:OUTPut:NTRansition <integer>
:STATus:QUEStionable:INTegrity:OUTPut:NTRansition?
Example
:STAT:QUES:INT:OUTP:NTR 1
Oversweep cleared is reported to the Integrity Summary of the Status Questionable register
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Short Range Comms & IoT Mode User's &Programmer's Reference 2506

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)