4 System
4.1 System
The Copy all to clipboard … control copies all the data to the Windows clipboard, in
comma-separated value (CSV) format.
Example
:SYST:SHOW SID
4.1.6 Control Panel…
Opens the Windows Control Panel. Control Panel is used to configure certain
elements of Windows that are not configured via the Multitouch UI System menus.
NOTE
This feature is
not
available if Option SF1 is installed.
Control Panel is a separate Windows application, so to return to the Instrument
Application, either:
–
Exit by tapping on the red X in the upper right-hand corner
–
Use Alt+Tab. Press and hold the Alt key and press and release the Tab key until
the Instrument logo is showing in the window in the center of the screen, then
release the Alt key
Notes No remote command for this key
Short Range Comms & IoT Mode User's &Programmer's Reference 1746
To Next Page
Loading...
Need help?
General
