Keysight x-series Instruction Manual

6 Input/Output
6.9 Calibration
Example
:SYST:CAL:ROW2:CAL:STAT ON
:SYST:CAL:ROW2:CAL:STAT?
Dependencies The SCPI command is applied to the currently selected Cal Group. The subopcode is used to identify
the Cal row in the Cal Group
If the subopcode does not reference an existing Cal row in the Cal Group, the error message “-221,
Settings conflict; Subopcode does not reference an existing Cal row” is generated
Preset All OFF
State Saved Saved in instrument state
Range
ON|OFF
6.9.1.22 Apply
Determines the Cal that is applied.
Remote Command
:SYSTem:CALibration:ROW[1]|2|…|100:APPLy:STATe ON | OFF | 1 | 0
:SYSTem:CALibration:ROW[1]|2|…|100:APPLy:STATe?
Example
:SYST:CAL:ROW2:APPL:STAT ON
:SYST:CAL:ROW2:APPL:STAT?
Dependencies The SCPI command is applied to the currently selected Cal Group. The subopcode is used to identify
the Cal row in the Cal Group
If the subopcode does not reference an existing Cal row in the Cal Group, the error message “-221,
Settings conflict; Subopcode does not reference an existing Cal row” is generated
You can only check the Apply checkbox for a Cal that has been executed. If you attempt to select the
Apply checkbox for Cal’s that have not been executed, the advisory message “Cal must be executed
before it can be applied” is displayed
If Apply Cal is ON, and you attempt to check the Apply checkbox for a Cal that is invalid for use with the
current measurement state, the error “Cal invalid with current measurement settings is shown, and
the checkbox remains unchecked
Couplings When the Apply check box is checked, if the Apply Cal Group setting is OFF, it will be turned on.
Calibrations are only applied when the Apply Cal Group is ON
Preset All OFF
State Saved Saved in instrument state
Range
ON|OFF
Annotation If any Cal check box in any group is checked and Apply Cal Group for that group is ON, RCal in the
Meas Bar displays in amber to indicate Calibrations are in use
6.9.1.23 Name
Sets an ASCII text field allowing you to name the selected Cal
2189 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)