Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.10 Spurious Emissions Measurement
Center Frequency On/Off
Turns the display of Center Frequency on the Meas Bar On or Off.
Remote
Command
:DISPlay:SPURious:FREQuency:CENTer[:STATe] ON | OFF | 1 | 0
:DISPlay:SPURious:FREQuency:CENTer[:STATe]?
Example
:DISP:SPUR:FREQ:CENT ON
:DISP:SPUR:FREQ:CENT?
Preset
ON
State Saved Yes
3.10.5.2 Annotation
Contains controls for setting up the annotation for the current Mode or
Measurement.
Graticule
Turns the display graticule On or Off for all windows with graticules in all
measurements in the current Mode. Also turns the graticule Y-Axis annotation on
and off.
Remote
Command
:DISPlay:GRATicule[:STATe] OFF | ON | 0 | 1
:DISPlay:GRATicule[:STATe]?
Example
:DISP:GRAT OFF
Notes The graticule is the set of horizontal and vertical lines that make up the grid/divisions for the X-Axis and
Y-Axis
Preset
ON
State Saved Saved in instrument state
Backwards
Compatibility
SCPI
:DISPlay:WINDow[1]:TRACe:GRATicule:GRID[:STATe] OFF | ON | 0 | 1
:DISPlay:WINDow[1]:TRACe:GRATicule:GRID[:STATe]?
This command is accepted for backwards compatibility with older instruments, but the WINDow,
TRACe and GRID parameters are ignored
Screen Annotation
Controls the display of the annunciation and annotation around the graticule,
including any annotation on lines (such as the display line, the threshold line, etc.)
and the Y-Axis annotation, for all windows with screen annotation in all
measurements in the current Mode.
Short Range Comms & IoT Mode User's &Programmer's Reference 1403

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)