Keysight x-series - 6.1.13.6 Sync Connected (Remote Query Only); 6.1.14 Source Preset

6 Input/Output
6.1 RF Source
6.1.13.6 Sync Connected (Remote Query Only)
Lets you query the state of synchronization.
Remote
Command
:SOURce:SYNC:CONNected?
Example
:SOUR:SYNC:CONN?
Returns: 1 when synchronization is established, 0 when synchronization is stopped
6.1.14 Source Preset
Lets you preset the source settings to their default values.
Remote Command
:SOURce:PRESet
Example
:SOUR:PRES
2025 Short Range Comms & IoT Mode User's &Programmer's Reference