EasyManuals Logo

Keysight x-series Instruction Manual

Keysight x-series
2530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1759 background imageLoading...
Page #1759 background image
4 System
4.2 I/O Config
non-default value. The query return type is a <string>
:SYST:PERS:DEF
is equivalent to:
:SYSTem:IDN “”
:SYSTem:IDN:CONF DEF
SYSTem:PERSona:MANufacturer
Sets the MANufacturer field of the *IDN? response. This is the first field of the
*IDN? response.
Remote
Command
:SYSTem:PERSona:MANufacturer <string>
:SYSTem:PERSona:MANufacturer?
Notes When setting the MANufacturer field, the current IDN response string is modified to replace the
manufacturer field with the string specified by the command. If the resulting IDN response matches one
of the predefined responses (:SYST:IDN:CONF FACT | AGIL), then the :SYST:IDN:CONF is
set to the corresponding value. If the IDN response with the new manufacturer field is not one of the
predefined values, then :SYST:IDN:CONF will be set to USER and :SYST:IDN will be set to the
new IDN response string
The query returns the current value of the *IDN? Manufacturer field
SYSTem:PERSona:MANufacturer:DEFault
Resets the MANufacturer field of the *IDN? response to the default value.
Remote
Command
:SYSTem:PERSona:MANufacturer:DEFault
:SYSTem:PERSona:MANufacturer:DEFault?
Notes The query returns the default MANufacturer field value of *IDN? even if the current setting of
*IDN? is the non-default value. The return type is a <string>
SYSTem:PERSona:MODel
Sets the MODel field of the *IDN? response. This is the second field of the *IDN?
response.
Remote
Command
:SYSTem:PERSona:MODel <string>
:SYSTem:PERSona:MODel?
Notes When setting the MODel field, the current IDN response string is modified to replace the model field
with the string specified by the command. If the resulting IDN response matches one of the predefined
responses (:SYST:IDN:CONF FACT | AGIL), then :SYST:IDN:CONF is set to the corres-
ponding value. If the IDN response with the new model field is not one of the predefined values, then
:SYST:IDN:CONF will be set to USER and :SYST:IDN will be set to the new IDN response string
1759 Short Range Comms & IoT Mode User's &Programmer's Reference

Table of Contents

Other manuals for Keysight x-series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keysight x-series and is the answer not in the manual?

Keysight x-series Specifications

General IconGeneral
Analysis BandwidthUp to 1 GHz (depending on model)
Real-Time BandwidthUp to 1 GHz (depending on model)
Form FactorBenchtop
ConnectivityLAN, USB, GPIB
Resolution Bandwidth1 Hz to 10 MHz (depending on model)

Related product manuals