Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.2 Modulation Analysis Measurement
:CALC:EVM:MARK2:FUNC:BAND:SPAN?
Preset When marker turned on, 1/20th of current span or displayed time length
State Saved Yes
Min/Max -9.9E+37 / 9.9E+37
Band Left
This control enables you to adjust the left side of the band. In order to remain
centered in the band, the marker position must also change as you change the left
edge. The right edge is unaffected.
Remote
Command
:CALCulate:EVM:MARKer[1]|2|...|12:FUNCtion:BAND:LEFT <real>
:CALCulate:EVM:MARKer[1]|2|...|12:FUNCtion:BAND:LEFT?
Example
:CALC:EVM:MARK2:FUNC:BAND:LEFT 1.23E+06
:CALC:EVM:MARK2:FUNC:BAND:LEFT?
Couplings Changes marker X to keep the marker centered in the band
Preset When a marker is turned on, 1/40th of current span or displayed time length left of the marker position
State Saved Yes
Min/Max -9.9E+37 / 9.9E+37
Band Right
This control enables you to adjust the right side of the band. In order to remain
centered in the band, the marker position must also change as you change the right
edge. The left edge is unaffected.
Remote
Command
:CALCulate:EVM:MARKer[1]|2|...|12:FUNCtion:BAND:RIGHt <real>
:CALCulate:EVM:MARKer[1]|2|...|12:FUNCtion:BAND:RIGHt?
Example
:CALC:EVM:MARK2:FUNC:BAND:RIGHT 1.23E+06
:CALC:EVM:MARK2:FUNC:BAND:RIGHT?
Couplings Changes marker X to keep the marker centered in the band
Preset When a marker is turned on, 1/40th of current span or displayed time length right of the marker
position
State Saved Yes
Min/Max -9.9E+37 / 9.9E+37
266 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)