Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.4 HRP UWB Demodulation Measurement
Example
:HUWB:COMP:CCLO ON
:HUWB:COMP:CCLO?
Preset
ON
State Saved Yes
Range
OFF|ON
Advanced Demod Setup
Configures advanced demodulation parameters.
Phase Tracking
Enables phase tracking.
Remote Command
[:SENSe]:HUWB:PHASe:TRACking[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:PHASe:TRACking[:STATe]?
Example
:HUWB:PHAS:TRAC ON
:HUWB:PHAS:TRAC?
Preset
ON
State Saved Yes
Range
OFF|ON
Initial Frequency Error Compensation
Enables or disables initial frequency error estimation and correction. Initial
estimation has a lock range of about +/- 1 MHz.
Remote
Command
[:SENSe]:HUWB:COMPensation:FREQuency:ESTimation FRAMe | SYNC
[:SENSe]:HUWB:COMPensation:FREQuency:ESTimation?
[:SENSe]:HUWB:COMPensation:FREQuency[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:COMPensation:FREQuency[:STATe]?
Example
:HUWB:COMP:FREQ:EST SYNC
:HUWB:COMP:FREQ:EST?
:HUWB:COMP:FREQ ON
:HUWB:COMP:FREQ?
Preset ON
State Saved Yes
Yes
Range Est from Sync | Est from Entire Frame
516 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)