Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.6 Power Stat CCDF Measurement
OBW, Monitor Spectrum and Spurious Emissions have been supported by this
application, with the following exceptions:
–
For Spurious Emissions, there isn’t any customized setting for any radio
standard;
–
SEM is only supported by ZigBee;
–
LoRa’s preset isn’t supported by SEM and ACP;
The major changes of the settings of the power measurements which are impacted
by preset to standard are listed in the table below.
3.6.8.3 Advanced
Contains controls for setting advanced functions of the instrument.
Short Range Comms & IoT Mode User's &Programmer's Reference 761

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)