Keysight x-series Instruction Manual

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
–
"Questionable Power Condition" on page 2476
–
"Questionable Power Enable" on page 2476
–
"Questionable Power Event Query" on page 2477
–
"Questionable Power Negative Transition" on page 2477
–
"Questionable Power Positive Transition" on page 2477
Questionable Power Condition
Returns the decimal value of the sum of the bits in the Questionable Power
Condition register.
NOTE
The data in this register is continuously updated and reflects the current
conditions.
Remote Command
:STATus:QUEStionable:POWer:CONDition?
Example
:STAT:QUES:POW:COND?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
Questionable Power Enable
Determines which bits in the "Questionable Power Condition" on page 2476
Register will set bits in the Questionable Power Event register, which also sets the
Power Summary bit (bit 3) in the "Questionable Register" on page 2472.
The variable <integer> is the sum of the decimal values of the bits you want to
enable.
Remote
Command
:STATus:QUEStionable:POWer:ENABle <integer>
:STATus:QUEStionable:POWer:ENABle?
Example
:STAT:QUES:POW:ENAB 2
Source Unlevelled will be reported to the Power Summary of the Status Questionable register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Short Range Comms & IoT Mode User's &Programmer's Reference 2476

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)