Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.3 LoRa (CSS) Demodulation Measurement
Sample Rate
Display sample rate of recalled IQ data file if recalled file format contains sampling
rate information(.csv, .sdf, .txt). Set sampling rate to playback recalled IQ data if
recalled file format is .bin or .binx which does not contain sampling rate information.
Remote Command
:CALCulate:LORA:PLAY:SRATe <freq>
:CALCulate:LORA:PLAY:SRATe?
Example
:CALC:LORA:PLAY:SRAT 100KHz
:CALC:LORA:PLAY:SRAT?
Couplings Display only after .csv, .sdf, .txt file recalling
Settable after .bin or .binx file recalling
Preset 0
State Saved No
Sample Points (Display Only)
Display the total sample number of recalled IQ data file.
Sample Time (Display Only)
Display the total sample time of recalled IQ data file.
3.3.9.4 Recording
This tab contains the parameters for recording.
See the Save chapter and Recall chapter under Recording for more information on
how to load and save Recording files.
See the Sweep chapter under Playback for more information about how to manage
and play recordings.
Sample Rate (Display Only)
Display the sample rate of saved IQ data file.
Sample Points (Display Only)
Display the total sample number of saved IQ data file.
428 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)