Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.5 Channel Power Measurement
Example
:CALC:CHP:MARK3:STAT ON
:CALC:CHP:MARK3:STAT?
Preset
OFF
State Saved Saved in instrument state
Range
OFF|ON
Backwards
Compatibility
SCPI
:CALCulate:CHPower:MARKer[1]|2|…|12:STATe OFF | ON | 0 | 1
:CALCulate:CHPower:MARKer[1]|2|…|12:STATe?
Delta Marker (Reset Delta)
This control has the same effect as pressing Delta in "Marker Mode" on page 621.
The selected marker becomes a Delta marker. If the selected marker is already a
Delta marker, the reference marker is moved to the current position of the selected
marker, thus resetting the Delta to zero.
Marker Settings Diagram
Lets you configure the Marker system using a visual utility.
All Markers Off
Turns off all markers.
Remote Command
:CALCulate:CHPower:MARKer:AOFF
Example
:CALC:CHP:MARK:AOFF
3.5.7.3 Peak Search
The controls on this tab let you move the marker to selected peaks of the signal,
giving you enormous analysis capabilities, particularly when combined with "Marker
Delta" on page 623.
NOTE
Pressing the Peak Search hardkey automatically moves you to the Peak Search
page of the Marker menu and performs a peak search.
Pressing the Peak Search tab once you are already in the Marker menu does
not perform a peak search.
622 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)