Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.11 IQ Waveform Measurement
3.11.8.3 Advanced
Contains advanced functions that are used for specific applications. These settings
should not be changed for most measurements.
Does not appear in VXT.
Phase Noise Optimization
Sets the LO (local oscillator) phase noise behavior for various desired operating
conditions.
Remote Command
[:SENSe]:WAVeform:FREQuency:SYNThesis[:STATe] 1 | … | 5
For the meaning of each numeric option value, see "Parameter Options & Installed Options" on page
1606 below
Short Range Comms & IoT Mode User's &Programmer's Reference 1605

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)