To Next Page

To Previous Page

7 Save/Recall/Print

7.3 Save

7.3.61 Mass Storage Device Copy (Remote Command Only)

Transfers data to/from a file and a peripheral device.

Remote

Command

:MMEMory:COPY:DEVice <source_string>,<dest_string>

<source_string> and <dest_string> must be valid logical paths

Notes The strings must be a valid logical path or a valid device keyword. If dest_string is a device

keyword, the data is copied from the source file to the device. If source_string is a device

keyword, the data is copied to the source file from the device

Valid device keywords are:

SNS (smart noise source)

An error is generated if the file or device is not found

7.3.62 Mass Storage Delete (Remote Command Only)

Remote

Command

:MMEMory:DELete <file_name>[,<directory_name>]

<file_name> and <directory_name> must be valid logical paths

Example

:MMEM:DEL "Screen_0000.png"

Notes If no directory is specified, uses the current directory

Removes a file from the specified directory. <file_name> specifies the file name to be removed. This

command generates an “access denied” error if the file is in a restricted folder (for example,

C:\Windows) and you do not have Power User or Administrator privileges

7.3.63 Mass Storage Data (Remote Command Only)

Creates a file containing the specified data or queries the data from an existing file.

Remote

Command

:MMEMory:DATA <file_name>, <data>

<file_name> must be a valid logical path

:MMEMory:DATA? <file_name>

Example

:MMEM:DATA? "MyFile.txt"

Notes If no directory is specified, uses the current directory

The command form :MMEMory:DATA <file_name>,<data> loads <data> into the file

<file_name>. <data> is in 488.2 block format. <file_name> is string data

The response to :MMEMory:DATA? <file_name> is the associated <data> in block format

Short Range Comms & IoT Mode User's &Programmer's Reference 2307

Keysight x-series Instruction Manual

Other manuals for Keysight x-series