Keysight x-series Instruction Manual

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
Questionable Integrity Uncalibrated Enable
Determines which bits in the "Questionable Integrity Uncalibrated Condition" on
page 2508 Register will set bits in the "Questionable Integrity Uncalibrated Event
Query" on page 2509 register, which also sets the Data Uncalibrated Summary bit
(bit 3) in the "Questionable Integrity Register" on page 2497.
The variable <integer> is the sum of the decimal values of the bits that you want to
enable.
Remote
Command
:STATus:QUEStionable:INTegrity:UNCalibrated:ENABle
:STATus:QUEStionable:INTegrity:UNCalibrated:ENABle?
Example
:STAT:QUES:INT:UNC:ENAB 1
Oversweep (Meas Uncal) is reported to the Integrity Summary of the Status Questionable register
Preset 32767
Min 0
Max 32767
Status Bits/OPC
dependencies
Sequential command
Questionable Integrity Uncalibrated Event Query
Returns the decimal value of the sum of the bits in the "Questionable Integrity
Uncalibrated Condition" on page 2508 register.
NOTE
The register requires that the associated PTRansition or NTRansition filters be
set before a condition register bit can set a bit in the event register. The data in
this register is latched until it is queried. Once queried, the register is cleared.
Remote
Command
:STATus:QUEStionable:INTegrity:UNCalibrated[:EVENt]?
Example
:STAT:QUES:INT:UNC?
Preset 0
Status Bits/OPC
dependencies
Sequential command
Questionable Integrity Uncalibrated Negative Transition
Determines which bits in the "Questionable Integrity Uncalibrated Condition" on
page 2508 register will set the corresponding bit in the "Questionable Integrity
2509 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)