Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.8 SEM Measurement
displayed at the end of each sweep. After the specified number of average counts,
the average mode (termination control) setting determines the average action.
In the remote mode, use "Averaging On/Off" on page 1095 to turn Averaging on or
off.
Remote Command
[:SENSe]:SEMask:AVERage:COUNt <integer>
[:SENSe]:SEMask:AVERage:COUNt?
Example
:SEM:AVER:COUN 100
:SEM:AVER:COUN?
Preset 10
State Saved Saved in instrument state
Min/Max 1/10000
Averaging On/Off
Turns Averaging on or off.
NOTE
In this measurement, Average Type is preset to the Log-Pwr Avg (Video)
method. Other averaging methods are not available.
Remote Command
[:SENSe]:SEMask:AVERage[:STATe] ON | OFF | 1 | 0
[:SENSe]:SEMask:AVERage[:STATe]?
Example
:SEM:AVER ON
:SEM:AVER?
Preset
OFF
State Saved Saved in instrument state
Range
ON|OFF
Meas Method
Sets the measurement method:
Method Option Description
Integration BW
0|OFF
Enables you to set the channel integration bandwidth
RRC Weighted
1|ON
Selects Root Raised Cosine (RRC) filtering of the carriers. The a
value (rolloff) for the filter is set to the value of the Filter Alpha
parameter
Remote Command
[:SENSe]:SEMask:FILTer[:RRC][:STATe] OFF | ON | 0 | 1
[:SENSe]:SEMask:FILTer[:RRC][:STATe]?
Short Range Comms & IoT Mode User's &Programmer's Reference 1095

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)