Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.8 SEM Measurement
:SEM:OFFS:INN:LIST:STAT ON, ON, ON, OFF, OFF, OFF
:SEM:OFFS:INN:LIST:STAT?
Notes Comma-separated list of values
OFFSet 1 is for BTS, 2 for MS. Default is BTS
If the offset is outside the frequency range, the result spectrum will be invalid
Couplings Coupled to "Stop Freq" on page 1143. If Start Freq exceeds Stop Freq, Stop Freq is automatically
adjusted to (Start Freq + 100Hz)
Preset
Mode Values
MSR 15 kHz, 215 kHz, 1.015 MHz, 1.5 MHz, 10.5 MHz, 15.00 MHz, 30 MHz, 30 MHz,
30 MHz, 30 MHz, 30 MHz, 30 MHz | 15 kHz, 215 kHz, 1.015 MHz, 1.5 MHz, 10.5
MHz, 15.00 MHz, 30 MHz, 30 MHz, 30 MHz, 30 MHz, 30 MHz, 30 MHz
5G NR 50 kHz, 5.05 MHz, 10.5 MHz, 40.00 MHz, 100 MHz, 100 MHz, 100 MHz, 100
MHz, 100 MHz, 100 MHz, 100 MHz, 100 MHz | 15.00 kHz, 1.5 MHz, 5.5 MHz,
100.50 MHz, 105.00 MHz, 100 MHz, 100 MHz, 100 MHz, 100 MHz, 100 MHz,
100 MHz, 100 MHz
LTEAFDD,
LTEATDD
50 kHz, 5.05 MHz, 10.5 MHz, 15.00 MHz, 30 MHz, 40 MHz, 40 MHz, 40 MHz, 40
MHz, 40 MHz, 40 MHz, 40 MHz | 15.00 kHz, 1.5 MHz, 5.5 MHz, 6.5 MHz, 10
MHz, 20MHz, 20MHz, 20MHz, 20MHz, 20MHz, 20MHz, 20MHz
Mode Values
MSR ON, ON, ON, ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF | ON,
ON, ON, ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF
5GNR ON, ON, ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF,OFF | ON,
ON, ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF, OFF
LTEAFDD
LTEATDD
ON, ON, ON, OFF, OFF, OFF,OFF, OFF, OFF, OFF,OFF,OFF | ON,
ON, ON, ON, OFF, OFF, OFF, OFF, OFF, OFF, OFF, OFF
State Saved Saved in instrument state
Saved in instrument state
Range
ON|OFF
Min/Max 0 Hz/Depends on instrument maximum frequency. It’s always Offset Stop Freq -100 Hz
Stop Freq
Specifies the stop frequency for the currently selected offset.
When sending the remote command, missing values are not permitted; that is, if you
want to change values 2 and 6 you must send all values up to 6. Subsequent values
remain unchanged. The query for this parameter always returns 12 values.
Remote
Command
[:SENSe]:SEMask:OFFSet[1]|2:INNer:LIST:FREQuency:STOP <freq>, …
Short Range Comms & IoT Mode User's &Programmer's Reference 1143

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)