Keysight x-series Instruction Manual

10 Hardware-Accelerated Fast Power Measurement (Remote Command Only)
10.4 Configure Fast Power Measurement (Remote Command Only)
10.4 Configure Fast Power Measurement (Remote Command Only)
Begins hardware setup and returns immediately, with no acquisition made. This can
be used in parallel with other hardware operations to effectively hide the hardware
setup time.
Remote Command
:CALCulate:FPOWer:POWer[1,2,…,999]:CONFigure
Example
:CALC:FPOW:POW1:CONF
Notes Option FP2 is required
2524 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)