Keysight x-series Instruction Manual

4 System
4.10 Service
4.10 Service
Accesses capabilities performed in the factory or under instructions from repair
procedures. This key is only visible when the logged-in user is “advanceduser” or
“saservice”. The first access to the Service menu after invoking the instrument
application will require an authentication Service Code.
Dependencies Not available in UXM
Short Range Comms & IoT Mode User's &Programmer's Reference 1890

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)