Keysight x-series - 3.1 Measurement Commands

3 Short-Range Comms & IoT Mode
3.1 Measurement Commands
3.1 Measurement Commands
The commands for selecting each measurement are shown below. The commands
relating to the Views and Windows for each measurement are described in the
documentation for each measurement.
Example Monitor Spectrum measurement
:CONFigure:MONitor
IQ Waveform measurement
:CONFigure:WAVeform
Channel Power measurement:
:CONFigure:CHPower
Occupied Bandwidth measurement
:CONFigure:OBWidth
Adjacent Channel Power measurement
:CONFigure:ACPower
Spectrum Emissions Mask measurement
:CONFigure:SEMask
Spurious Emissions measurement
:CONFigure:SPURious
LoRa CSS demod measurement
:CONFigure:LORA
Modulation Analysis measurement
:CONFigure:EVM
Power Stat CCDF measurement
:CONFigure:PSTatistic
HRP UWB Demod measurement
:CONFigure:HUWB
Preset MONitor
State Saved Instrument State
180 Short Range Comms & IoT Mode User's &Programmer's Reference