Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.7 ACP Measurement
State Saved Saved in instrument state
Min/Max 0.01/1.0
Offset
Lets you configure the spacing of the offset regions.
Offset Frequency Define
Lets you select offset frequency definition. Each standard defines each offset
frequency from Carrier.
For example, 3GPP2 requires the “From Carrier Center to Integ BW Closer Edge”
definition. LTE conformance test requires “From Carrier Edge to Integ BW Center”
and/or “From Carrier Edge to Integ BW Closer Edge” definition.
CTOCenter
From the lowermost carrier center frequency (for lower offset), the uppermost carrier center frequency
(for upper offset) to the center frequency of each Offset Integ BW
CTOEdge
From the lowermost carrier center frequency (for lower offset), the uppermost carrier center frequency
(for upper offset) to the closest edge frequency of each Offset Integ BW
ETOCenter
From the lowermost carrier center frequency - spacing of this carrier /2 (for lower offset), the
uppermost carrier center frequency + spacing of this carrier /2 (for upper offset) to the center
frequency of each Offset Integ BW
ETOEdge
From the lowermost carrier center frequency - spacing of this carrier /2 (for lower offset), the
uppermost carrier center frequency + spacing of this carrier /2 (for upper offset) to the closest edge of
each Offset Integ BW
RTOCenter
5G NR Mode only
From either the lower or upper RF BW** edge frequency to the center frequency of each Offset Integ
BW
RTOEdge
5G NR Mode only
From either the lower or upper RF BW** edge frequency to the closest edge frequency of each Offset
Integ BW
RCTOCenter
5G NR Mode only
From the center frequency of RF BW** to the center frequency of each Offset Integ BW
SCTOCenter
5G NR Mode only
From the center frequency of sub-block** to the center frequency of each Offset Integ BW
** RF BW = BWchannel,CA
which is defined in each 3GPP standard, regardless of
“Measure Carrier” for the uppermost and the lowermost carriers being Enabled or
Disabled. When the Number of Component Carrier = 1, RF BW = BW
channel
= 2 x
F
offset,RAT
** sub-block (bandwidth) = BW
channel,block
which is defined in each 3GPP standard,
regardless of “Measure Carrier” for the uppermost and the lowermost carriers being
912 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)