Keysight x-series Instruction Manual

4 System
4.11 System Remote Commands (Remote Commands Only)
4.11 System Remote Commands (Remote Commands Only)
These commands have no front-panel key equivalent.
–
"List installed Options (Remote Query Only)" on page 1891
–
"Lock the Front-panel keys (Remote Command Only)" on page 1892
–
"Lock Workstation (Remote Command Only)" on page 1892
–
"List SCPI Commands (Remote Query Only)" on page 1894
–
"Front Panel activity history (Remote Query only)" on page 1894
–
"SCPI activity history (Remote Query only)" on page 1895
–
"Instrument start time (Remote Query only)" on page 1895
–
"SCPI Version Query (Remote Query Only)" on page 1896
–
"Date (Remote Command Only)" on page 1896
–
"Time (Remote Command Only)" on page 1896
–
"Input Overload Enable (Remote Command Only)" on page 1897
–
"Power Up (Remote Query Only)" on page 1897
4.11.1 List installed Options (Remote Query Only)
Lists the installed options that pertain to the instrument (signal analyzer).
Remote
Command
:SYSTem:OPTions?
Example
:SYST:OPT?
Notes The return string is a comma-separated list of the installed options. For example:
“503,P03,PFR”
:SYSTem:OPTions? and *OPT? are the same
State Saved No
1891 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)