To Next Page

To Previous Page

3 Short-Range Comms & IoT Mode

3.6 Power Stat CCDF Measurement

Standard Compatibility

ZigBee (IEEE 802.15.4)

Z-Wave (ITU-T G.9959)

LoRa

CSS HRP UWB

Channel Power Yes Yes No

ACP Yes No No

SEM Yes No Yes

OBW Yes Yes No

Spurious Emissions Yes Yes No

CCDF Yes Yes No

IQ Waveform Yes Yes No

Monitor Spectrum Yes Yes No

Modulation Analysis (Digital) Yes No No

LoRa CSS Demod (Analog) No Yes No

Preset to Std

This group of controls lets you easily set up the analyzer for ZigBee (IEEE 802.15.4),

Z-Wave (ITU-T G.9959) , LoRa

CSS or HRP UWB measurements.

Remote Command

[:SENSe]:RADio:STANdard:PRESet ZIGBEE2450 | ZIGBEE915 | ZIGBEE868 |

Example

:RAD:STAN:PRES ZIGBEE2450

Activates the preset for ZigBee 2450

Notes “Preset to Standard” was re-designed using cascading list dialog in XA25, thus all radio standards and

the associated preset options are accessible at one time (prior to XA25, users need to select Radio

Standard first, then select “preset to standard” which were conditionally shown according to the

selected radio standard.)

The selected Radio Standard and Preset results are displayed on the top of Meas Standard menu

panel

Dependencies “Preset to Std” will set “Radio Standard” accordingly, though it was changed to a SCPI only setting for

backward compatibility

Range 802.15.4 OQPSK 2450 MHz | 802.15.4 BPSK 915 MHz | 802.15.4 BPSK 868/950 MHz | 802.15.4

OQPSK 780 MHz | 802.15.4 OQPSK 915 MHz | 802.15.4 OQPSK 868 MHz | Z-Wave R1 (9.6 kbps) FSK |

Z-Wave R2 (40 kbps) FSK | Z-Wave R3 (100kbps) GFSK | LoRa CSS 7.815 kHz| LoRa CSS 10.4167 kHz|

LoRa CSS 15.625 kHz| LoRa CSS 20.8333 kHz| LoRa CSS 31.25 kHz| LoRa CSS 41.667 kHz| LoRa CSS

CSS 500 kHz| LoRa CSS 812.5 kHz| LoRa CSS 1625 kHz | HRP UWB 499.2 MHz

Before XA25, there were three power measurements included in this mode: CHP,

ACP, and SEM. As of XA25, five new power measurements: CCDF, IQ Waveform,

760 Short Range Comms & IoT Mode User's &Programmer's Reference

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)

Keysight x-series Instruction Manual

Table of Contents

Other manuals for Keysight x-series

Questions and Answers:

Keysight x-series Specifications

Related product manuals