Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.7 ACP Measurement
Fast Power RBW Mode
Specifies RBW behavior of Fast Power under Meas Method.
Option SCPI Description
Best Speed
SPEed
The acquisition RBW is set to be configured for best speed. The
RBW is automatically calculated, and is not configurable
Explicit
EXPLicit
You can configure RBW manually
Remote Command
[:SENSe]:ACPower:BANDwidth[:RESolution]:FPOWer:MODE SPEed | EXPLicit
[:SENSe]:ACPower:BANDwidth[:RESolution]:FPOWer:MODE?
Example
:ACP:BAND:FPOW:MODE EXPL
:ACP:BAND:FPOW:MODE?
Dependencies Grayed-out when "Meas Method" on page 863 is not Fast Power
Not available in VXT models M9410A/11A/15A
Couplings If EXPLicit is selected, "Res BW" on page 831 is configurable. If not, Res BW is grayed-out
Preset
SPEed
State Saved Saved in instrument state
Fast Power IF Gain Offset
Lets you optimize for dynamic range versus input signal level.
Remote Command
[:SENSe]:ACPower:IF:GAIN:FPOWer <integer>
[:SENSe]:ACPower:IF:GAIN:FPOWer?
Example
:ACP:IF:GAIN:FPOW 10
:ACP:IF:GAIN:FPOW?
Dependencies Grayed-out when "Meas Method" on page 863 is not Fast Power
Not available in VXT models M9410A/11A/15A
Preset 0
State Saved Saved in instrument state
Min/Max -20/20
Integration BW
Selects an Integration BW passband from either -3 dB (DB3) or -6 dB (DB6).
Remote Command
[:SENSe]:ACPower:FILTer:BANDwidth[:INTegration] DB3 | DB6
[:SENSe]:ACPower:FILTer:BANDwidth[:INTegration]?
Short Range Comms & IoT Mode User's &Programmer's Reference 971

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)