Keysight x-series Instruction Manual

9 Programming the Instrument
9.4 Status Register System & STATus Subsystem
9.4.6.4 Operation Instrument Register
Monitors instrument-related operations and summarizes them in bit 11 of the
"Operation Register" on page 2465.
Bit Condition Operation
0 Instrument Locked The instrument is locked
Filter Registers
–
"Operation Instrument Condition" on page 2469
–
"Operation Instrument Enable" on page 2470
–
"Operation Instrument Event Query" on page 2470
–
"Operation Instrument Negative Transition" on page 2471
–
"Operation Instrument Positive Transition" on page 2471
Operation Instrument Condition
Returns the decimal value of the sum of the bits in the Status Operation Instrument
Condition register.
NOTE
The data in this register is continuously updated and reflects the current
conditions.
Remote Command
:STATus:OPERation:INSTrument:CONDition?
Example
:STAT:OPER:INST:COND?
Preset 0
Status Bits/OPC depend-
encies
Sequential command
2469 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)