Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.4 HRP UWB Demodulation Measurement
Preset 25%
State Saved Yes
Min 0%
Max 100.0%
Data NRMSE (Remote Command Only)
Sets the limit for data NRMSE pass/fail test.
Remote
Command
:CALCulate:HUWB:LIMit:NRMSe:DATA <real>
:CALCulate:HUWB:LIMit:NRMSe:DATA?
Example
:CALC:HUWB:LIM:NRMS:DATA 25
:CALC:HUWB:LIM:NRMS:DATA?
Preset 30%
State Saved Yes
Min 0%
Max 100.0%
PHR NRMSE
Sets the limit for PHR NRMSE pass/fail test.
Remote
Command
:CALCulate:HUWB:LIMit:NRMSe:PHR <real>
:CALCulate:HUWB:LIMit:NRMSe:PHR
Example
:CALC:HUWB:LIM:NRMS:PHR 25
:CALC:HUWB:LIM:NRMS:PHR?
Preset 30%
State Saved Yes
Min 0%
Max 100.0%
PSDU NRMSE
Sets the limit for PSDU NRMSE pass/fail test.
Remote
Command
:CALCulate:HUWB:LIMit:NRMSe:PSDU <real>
:CALCulate:HUWB:LIMit:NRMSe:PSDU
Example
:CALC:HUWB:LIM:NRMS:PSDU 25
:CALC:HUWB:LIM:NRMS:PSDU?
520 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)