Keysight x-series Instruction Manual

6 Input/Output
6.1 RF Source
6.1.11.9 PM
Enables or disables phase modulation.
Turning PMON when another modulation format is already on results in the previous
modulation format being turned OFF and the generation of an error.
Remote Command
:SOURce:PM:STATe ON | OFF | 1 | 0
:SOURce:PM:STATe?
Example
:SOUR:PM:STAT OFF
Dependencies Not available in E7760B
Preset
OFF
Range
ON|OFF
6.1.11.10 PM Deviation
Lets you set the phase modulation deviation in radian.
Remote Command
:SOURce:PM[:DEViation] <real>
:SOURce:PM[:DEViation]?
Example
:SOUR:PM 1.00
Dependencies Not available in E7760B
Preset 0.1 rad
Min 0.1 rad
Max
Instrument Type Value
M9410A/11A 10.0 rad
All Others 20.0 rad
6.1.11.11 PM Rate
Lets you set the internal phase modulation rate.
Remote Command
:SOURce:PM:INTernal:FREQuency <freq>
:SOURce:PM:INTernal:FREQuency?
Example
:SOUR:PM:INT:FREQ 40.0 Hz
Dependencies Not available in E7760B
Preset 400.0 Hz
1977 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)