Keysight x-series Instruction Manual

3 Short-Range Comms & IoT Mode
3.8 SEM Measurement
MSR
LTE-Advanced FDD/TDD and 5G NR
3.8.12.3 Gate
Allows you to see your Gating signal at the same time as the measured data. See the
description under "Gate View On/Off" on page 2366 in Trigger, Gate Settings.
Views in which the Gate window appears:
View Size Position
Gate View One third, full width Top
3.8.13 Amplitude
Activates the Amplitude menu and selects Reference Level or Reference Value as
the active function, depending on the measurement.
Some features in this menu apply to multiple measurements. Some other features
apply only to specific measurements and their controls are blanked or grayed-out in
measurements that do not support the feature.
Short Range Comms & IoT Mode User's &Programmer's Reference 1037

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)