Keysight x-series Instruction Manual

2 User Interface
2.17 View Editor
Now press the View Editor button (the blue hand) to exit the View Editor. At this
point, you have an edited Predefined View, as shown by the * next to Basic:
When you are finished with it, you can restore the Layout to the default for Basic by
pressing “Restore Layout to Default”. Or you can save your edited View as a “User
166 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)