Keysight x-series Instruction Manual

2 User Interface
2.17 View Editor
Measurement Name SCPI ID
PM
PM
PM Deviation
PMDeviation
Power Amplifier
PAMPlifier
Power Control
PCONtrol
Power Stat CCDF
PSTatistic
Power vs Time
EPVTime
Pulse
PULSe
QPSK EVM
EVMQpsk
Real Time Scan
RTSC
RF Power
RFPower
SEM
SEMask
Spectral Flatness
FLATness
Spectrum & PvT
RTSA
Spot Frequency
SFRequency
Spurious Emissions
SPURious
Streaming
STReaming
Strip Chart
SCHart
Swept SA
SANalyzer
TOI
TOI
Transmit Analysis
TX
Transmit On/Off Power
PVTime
Transmit Power
(Burst Power)
TXPower
Tuned RF Level
TRFLevel
Tuned RF Level with Tracking
TTRF
Tx Band Spur
ETSPur
VHF Omni-Directional Range
VOR
Examples:
–
The User View file for the Swept SA measurement is SA.SANalyzer.layout
–
The User View file for the ACP measurement in the WCDMA mode is
WCDMA.ACPower.layout
Copy the desired file to a thumb drive or to your network. Then go to the target
instrument and copy the file into the D:\Users\Instrument\My
Documents\UserViews directory on that instrument (again, assuming you are
logged in as Instrument).
Short Range Comms & IoT Mode User's &Programmer's Reference 171

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)