Keysight x-series Instruction Manual

Table Of Contents
10.2.21 Trigger Source 2518
10.2.22 Trigger Timeout 2519
10.2.23 Signal Input 2519
10.2.24 Use Preselector 2519
10.2.25 Channel Bandwidth Array 2519
10.2.26 Channel Filter Type Array 2520
10.2.27 Channel Filter Alpha Array 2520
10.2.28 Channel Measurement Function Array 2520
10.2.29 Channel Offset Frequency Array 2521
10.2.30 Channel Occupied Bandwidth Percent Array 2521
10.2.31 Channel x-dB Bandwidth Array 2522
10.3 Define Fast Power Measurement Query (Remote Command Only) 2523
10.4 Configure Fast Power Measurement (Remote Command Only) 2524
10.5 Initiate Fast Power Measurement (Remote Command Only) 2525
10.6 Fetch Fast Power Measurement (Remote Command Only) 2526
10.7 Execute Fast Power Measurement (Remote Command Only) 2527
10.8 Binary Read Fast Power Measurement (Remote Command Only) 2528
10.9 Diagnostic Binary Read Fast Power Measurement (Remote
Command Only) 2529
80 Short Range Comms & IoT Mode User's &Programmer's Reference

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)