LINK OAM Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 26-45
clear efm-oam log-history
Clears the LINK OAM event logs history a port, range of ports or all ports.
clear efm-oam log-history port slot/port[-port2]
Syntax Definitions
slot/port The slot number for the module and the physical port number on that
module (e.g. 3/1 specifies port 1 on slot 3).
-port2 Specifies the last port in the range of ports.
Defaults
By default, the event logs are cleared for all the ports if no port is specified in the command.
Platforms Supported
OmniSwitch 6250.
Usage Guidelines
Use the port parameter with this command to clear the statistics for a specific port or range of ports.
Examples
-> clear efm-oam log-history
-> clear efm-oam log-history port 1/1
-> clear efm-oam log-history port 2/1-3
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaDot3OamGlobalClearEventLogs
alaDot3OamEventLogTable
alaDot3OamPortClearEventLogs
show efm-oam port statistics Displays the LINK OAM statistics on a port, or a range of ports or
on all ports.
show efm-oam port history Displays the log of events that have occurred on a port. Use this
command to display specific event logs on a port.
To Next Page
Loading...
