IPv6 Commands
page 30-52 OmniSwitch 6250 CLI Reference Guide November 2009
show ipv6 udp ports
Displays UDP Over IPv6 Listener Table. This table contains information about UDP/IPv6 endpoints.
show ipv6 udp ports
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Only endpoints utilizing IPv6 addresses are displayed in this table.
Examples
-> show ipv6 udp ports
Local Address Port Interface
---------------------------------------------+-----+--------------------
:: 521
Release History
Release 6.6.1; command was introduced.
Related Commands
output definitions
Local Address Local IPv6 address for this UDP listener. If a UDP listener accepts
packets for any IPv6 address associated with the switch, the value is ::0.
Port Local Port number for the UDP connection.
Interface Name of the interface the listener is using or “unknown.”
show ipv6 tcp ports Displays TCP Over IPv6 Connection Table.
To Next Page
Loading...
