QoS Policy Commands
page 39-138 OmniSwitch CLI Reference Guide November 2009
policy action no-cache
Disables logging of rule entries to the hardware cache.
policy action action_name no-cache
policy action action_name no no-cache
Syntax Definitions
action_name The name of the action.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
• Use the no form of this command to remove no cache from the policy action.
• Recommended for use when applied to traffic going to the switch.
Examples
-> policy action nc01 no-cache
-> policy action nc01 no no-cache
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
alaQoSActionTable
alaQoSActionName
alaQoSActionNocache
alaQoSAppliedActionTable
alaQoSAppliedActionName
alaQoSAppliedActionNocache
qos apply Applies configured QoS and policy settings to the current configuration.
show policy action Displays information about actions configured on the switch.
To Next Page
Loading...
