AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-65
show aaa accounting
Displays information about accounting servers configured for Authenticated Switch Access and 802.1X
port-based network access control. Accounting servers keep track of network resources (time, packets,
bytes, etc.) and user activity.
show aaa accounting
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the show aaa accounting command to display accounting servers configured for management session
types (Telnet, FTP, console port, HTTP, or SNMP) and 802.1X port-based network access control.
Examples
-> show aaa accounting
Authenticated vlan = 23,
1rst accounting server = RadiusServer
2nd accounting server = local
Authenticated vlan = 24,
1rst accounting server = RadiusServer,
2nd accounting server = local
Authenticated vlan = 25,
1rst accounting server = RadiusServer,
2nd accounting server = local
Session (telnet, ftp,...),
1rst accounting server = RadiusServer,
2nd accounting server = local
Release History
Release 6.6.1; command was introduced.
output definitions
Authenticated vlan Authenticated VLANs are not supported.
Session Indicates servers for Authenticated Switch Access session.
1st authentication server The first server to be polled for authentication information.
2nd authentication server The next server to be polled for authentication information.
To Next Page
Loading...
