AAA Commands
page 43-26 OmniSwitch 6250 CLI Reference Guide November 2009
user
Configures or modifies user entries in the local user database. Use the no form of the command to remove
the user from the local database.
user username [password password] [expiration {day | date}] [read-only | read-write [families... |
domains...| all | none]] [no snmp | no auth | sha | md5 | sha+des | md5+des] [end-user profile name]
no user username
Syntax Definitions
username The name of the user (maximum is 31 alphanumeric characters). Used
for logging into the switch. Required to create a new user entry or for
modifying a user.
password The user’s password in clear text or hexadecimal (corresponding to
encrypted form). Required to create a new user entry. The default mini-
mum length is 8 alphanumeric characters. The maximum is 47 charac-
ters.
day The number of days before this user’s current password expires. The
range is 1 to 150 days.
date The date (in the format mm/dd/yyyy hh:mm) that the user’s current pass-
word will expire.
read-only Specifies that the user will have read-only access to the switch.
read-write Specifies that the user will have read-write access to the switch.
families Determines the command families available to the user on the switch.
Each command family should be separated by a space. Command fami-
lies are subsets of domains. See Usage Guidelines for more details.
domains Determines the command domains available to the user on the switch.
Each domain should be separated by a space. See the Usage Guidelines
for more details.
all Specifies that all command families and domains are available to the
user.
none Specifies that no command families or domains are available to the user.
no snmp Denies the specified user SNMP access to the switch.
no auth Specifies that the user has SNMP access without any required SNMP
authentication and encryption protocol.
sha Specifies that the SHA authentication algorithm should be used for
authenticating SNMP PDU for the user.
md5 Specifies that the MD5 authentication algorithm should be used for
authenticating SNMP PDU for the user.
To Next Page
Loading...
