AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-53
end-user profile vlan-range
Configures a range of VLANs associated with an end-user profile.
end-user profile name vlan-range vlan_range [vlan_range2...]
end-user profile name no vlan-range vlan1 [vlan2..]
Syntax Definitions
name The name of an existing or a new end-user profile.
vlan_range The VLAN range associated with the end-user profile; values are sepa-
rated by a hyphen. For example: 3-6 indicates VLAN 3, VLAN 4,
VLAN 5, and VLAN 6.
vlan_range2... Optional additional VLAN ranges associated with the end-user profile.
Up to 16 ranges total may be configured.
vlan1 The VLAN range to be deleted from the profile. Only the start of the
range may be entered.
vlan2... Additional VLAN ranges to be deleted. Only the start of the range may
be entered.
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the no form of the command to remove a VLAN range or ranges from an end-user profile. Note that
only the start of the VLAN range must be entered to remove the range.
Examples
-> end-user profile Prof1 vlan-range 2-4 7-8
-> end-user profile Prof1 no vlan-range 7
Release History
Release 6.6.1; command was introduced.
To Next Page
Loading...
