Alcatel-Lucent OmniSwitch 6250 - Show Snmp Trap Replay

SNMP Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 10-25
show snmp trap replay
Displays SNMP trap replay information.
show snmp trap replay
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
A maximum of 60 traps will be replayed.
Examples
-> show snmp trap replay
ipAddress oldest replay number
-----------------------------------------+--------------------
172.21.160.32 12
172.21.160.12 57
0300:0000:0000:0000:0211:d8ff:fe47:470b 12
0300:0000:0000:0000:0211:d8ff:fe47:470c 42
Release History
Release 6.6.1; command was introduced.
output definitions
IPAddress IP address of the SNMP station manager that replayed the trap.
Oldest Replay Number Number of the oldest replayed trap.