Alcatel-Lucent OmniSwitch 6250 - Show User Password-Expiration

AAA Commands
page 43-72 OmniSwitch 6250 CLI Reference Guide November 2009
show user password-expiration
Displays the expiration date for passwords configured for user accounts stored on the switch.
show user password-expiration
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
This command displays the default password expiration, which is configured through the user password-
expiration command.
Examples
-> show user password-expiration
User password expiration is set to 3 days.
Release History
Release 6.6.1; command was introduced.
Related Commands
MIB Objects
aaaAsaConfig
aaaAsaDefaultPasswordExpirationInDays
user password-expiration Configures an expiration date for user passwords stored locally on the
switch or disables password expiration.
user Configures or modifies user entries in the local user database.
password Configures the current user’s password.
show user password-policy Displays the global password policy configuration for the switch.