Alcatel-Lucent OmniSwitch 6250 - Show Gvrp Configuration Linkagg;Port

GVRP Commands
page 23-28 OmniSwitch 6250 CLI Reference Guide November 2009
show gvrp configuration linkagg/port
Displays the GVRP configuration for a specific port or an aggregate of ports.
show gvrp configuration {linkagg agg_num | port slot/port}
Syntax Definitions
agg_num The number corresponding to the aggregate group.
slot/port The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
N/A
Examples
-> show gvrp configuration port 1/21
Port 1/21:
GVRP Enabled : yes,
Registrar Mode : normal,
Applicant Mode : participant,
Join Timer (msec) : 600,
Leave Timer (msec) : 1800,
LeaveAll Timer (msec) : 30000,
Legacy Bpdu : disabled
VLAN Memberships:
VLAN Id Static Restricted Restricted
Registration Registration Applicant
---------------+---------------+---------------+-----------
1 LEARN FALSE FALSE
2 LEARN FALSE FALSE
11 LEARN FALSE FALSE
12 LEARN FALSE FALSE
13 LEARN FALSE FALSE
14 LEARN FALSE FALSE
15 LEARN FALSE FALSE
16 LEARN FALSE FALSE
17 LEARN FALSE FALSE
18 LEARN FALSE FALSE
19 LEARN FALSE FALSE
20 LEARN FALSE FALSE
51 RESTRICT FALSE FALSE
52 RESTRICT FALSE FALSE