Alcatel-Lucent OmniSwitch 6250 - Show Aaa Authentication

AAA Commands
OmniSwitch 6250 CLI Reference Guide November 2009 page 43-59
show aaa authentication
Displays information about the current authenticated switch session.
show aaa authentication
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the show aaa authentication command to display authentication information about switch manage-
ment services (Telnet, FTP, console port, Secure Shell, etc.).
Examples
-> show aaa authentication
Service type = Default
1rst authentication server = RadiusServer
2nd authentication server = local
Service type = Console
1rst authentication server = local
Service type = Telnet
Authentication = Use Default,
1rst authentication server = RadiusServer
2nd authentication server = local
Service type = FTP
Authentication = Use Default,
1rst authentication server = RadiusServer
2nd authentication server = local
Service type = Http
Authentication = Use Default,
1rst authentication server = RadiusServer
2nd authentication server = local
Service type = Snmp
Authentication = Use Default,
1rst authentication server = RadiusServer
2nd authentication server = local
Service type = Ssh
Authentication = Use Default,
1rst authentication server = TacacsServer
2nd authentication server = local